Stain and Finishing Oil White

Staining and Finishing Oil - White
237ml

Stain and Finishing Oil is a wood conditioner, stain and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.

It can be used on bare wood or over previously painted surfaces.  No additional top coat required - it is highly durable as is.  If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your color.
 

Applications:

- If you apply it over Fusion Mineral Paint for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.  Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability, or brush on one of the pigmented colors and wipe off immediately for a beautiful, easy glaze effect.

- Our special blend is highly concentrated in pigment, so a little goes a long way.  The 237ml container will cover the same area as 1 liter of comparable stains.

- Please keep in mind that all oil based products typically yellow in time.  Using this over top of a white paint, will cause a slight yellowing effect.  We recommend our Tough Coat for going over lighter colors to avoid yellowing.
 

TIPS:

This Oil is so easy to use!
Click here to find out more!

How to Use on Bare Wood

1. Prep your surface by removing any existing coating on it so that bare wood is revealed
2. Apply SFO by pouring or brushing on a thin layer
3. Wait 15-20 minutes and then wipe away excess using a lint-free rag
4. Optional: add a second coat after 9 hours for a deeper colour or more sheen

How to Use over Fusion Mineral Paint

1. Apply SFO by pouring or brushing on a thin layer
2. Immediately wipe away excess using a lint-free rag
3. Optional: add a second coat after 9 hours for a deeper colour or more sheen

=>back