Wooster Shortcut Brush - unique Shergrip® handle adds more control and comfort!

Wooster Shortcut Brush with White China Bristle
- Great for corners and tight spaces.
- Flexible, soft handle adds comfort.
- For oil paints, varnishes, polyurethanes and oil-based stains.
 

Wooster Shortcut Synthetic Blend

Characteristics :

- Great for corners and tight spaces
- Unique Shergrip® flexible, soft handle adds control and comfort
- Excellent to use with Fusion Mineral Paints
- Synthetic blend bristle
- Short flexible soft handle
- Easy to wash
- For all latex, acrylics and water-based stains
- Can also be used with other acrylic paints and milk paint


 

For a soft durable sheen

Beeswax Finish is unique to Fusion™, and contains only pure natural beeswax and hemp oil. It is a food safe, all natural product, providing a soft smooth satin finish.

It will maintain that gorgeous satin lustre for a very long time!

Food Safe, No Chemicals, NO VOC’s & Biodegradable.

MAINTENANCE:
Apply as needed.

CURING:
30 days to fully cure.

120ml

 

Hemp Oil

This is a natural food safe oil finish containing no solvents. It is very easy to use and apply, making finishing your projects a breeze! It provides a protective, water-resistant surface. You can use it on bare wood to bring out the natural colours and patina for a beautiful authentic finish, or Milk-painted or painted surfaces for protection. Can also be used on New wood or stained wood. It penetrates to protect from the inside out. It does not leave a surface film that will chip or scratch. Test on an inconspicuous spot prior to using on an entire piece. 

How to use hemp oil
 

• Surface must be clean and dry. 
• Apply small amount of oil to surface using a clean cloth. 
• Rub gently until it is absorbed into raw wood or Milk Paint finish. 
• For additional sheen and protection, add 2-4 coats. 
• With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours. 
• Finished piece may take several days to cure. 
• To maintain, apply a light coat every other year as needed. 
• To remove scratches, lightly sand blemish, then reapply oil.

This oil is a great environmentally friendly product as the hemp seeds are grown without the use of herbicides or pesticides.

Hemp Oil

This is a natural food safe oil finish containing no solvents. It is very easy to use and apply, making finishing your projects a breeze! It provides a protective, water-resistant surface. You can use it on bare wood to bring out the natural colours and patina for a beautiful authentic finish, or Milk-painted or painted surfaces for protection. Can also be used on New wood or stained wood. It penetrates to protect from the inside out. It does not leave a surface film that will chip or scratch. Test on an inconspicuous spot prior to using on an entire piece. 

How to use hemp oil
 

• Surface must be clean and dry. 
• Apply small amount of oil to surface using a clean cloth. 
• Rub gently until it is absorbed into raw wood or Milk Paint finish. 
• For additional sheen and protection, add 2-4 coats. 
• With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours. 
• Finished piece may take several days to cure. 
• To maintain, apply a light coat every other year as needed. 
• To remove scratches, lightly sand blemish, then reapply oil.

This oil is a great environmentally friendly product as the hemp seeds are grown without the use of herbicides or pesticides.

Fusion™ Mineral Paint is famous for its built in top coat. The 100% acrylic resin acts as the “glue”, so to speak, and results in the best adhesion, and long-term durability against wear and tear. It is a waterproof, non-porous surface which is why you don’t need a top coat.

Sometimes though, you may want a slight sheen and added colour vibrancy, or you may want the peace of mind of an extra bit of protection over high traffic areas such as kitchen cabinets or table tops. This is where Tough Coat™ Matte Wipe-On Poly comes into play.

Tough Coat™ Matte Wipe-On Poly uses only 100% acrylic resin and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and dries to a matte finish. Fusion™ Tough Coat™ differs from our competition with its use of pure non yellowing acrylic.

Tough Coat Wipe-On Poly

Fusion™ Mineral Paint is famous for its built in top coat. The 100% acrylic resin acts as the “glue”, so to speak, and results in the best adhesion, and long-term durability against wear and tear. It is a waterproof, non-porous surface which is why you don’t need a top coat.

Sometimes though, you may want a slight sheen and added colour vibrancy, or you may want the peace of mind of an extra bit of protection over high traffic areas such as kitchen cabinets or table tops. This is where Tough Coat™ Wipe-On Poly comes into play.

Tough Coat™ Wipe-On Poly uses only 100% acrylic resin and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and dries to a matte finish. Fusion™ Tough Coat™ differs from our competition with its use of pure non yellowing acrylic.

Tough Coat Wipe-On Poly Gloss
Looking to create a piece with a high gloss finish that shines? Look no further, you can now achieve this look using our brand NEW Glossy Tough Coat Wipe-On Poly from Fusion™. Our fans asked for a glossy topcoat so we have delivered!  Applies the same as the original Matte Tough Coat Wipe-On Poly. Follow this simple tutorial to give any Fusion™ piece that extra shine and protection all in one!

Tung oil

Tung oil is unpolymerized and is all natural drying oil, providing a tough, flexible and highly water-resistant coating. Perfect for furniture, counter tops, interior and exterior wood surfaces. This oil provides a soft lustre with a finish that is unrivalled by many other oils.

How to use it

Clean and prep your surface

Prep is your friend! make sure your surface is clean, these natural oil finishes won’t penetrate polyurethane or varnish so you would need to remove that by sanding. 

Cut the Oil with Mineral Spirits

Thinning the oil with odorless solvent helps it penetrate the surface and speeds up the dry time. Subsequent coats can be full strength but must be wiped down after 15 minutes. Always allow ample drying time (48 hours+).  Using it without the solvent the dry time is longer. If a solvent has been used cut the Tung Oil it is no longer a food-safe finish.

Applying the oil

After the surface has been prepped by removing any debris, or unwanted previous poly coating, you may proceed to apply the Tung Oil finish. Apply the Tung Oil generously with a brush or cloth. Let the wood soak in the Tung Oil for approximately 5-10 minutes. Remove the excess Tung Oil within 10 minutes of application, if you leave the Tung Oil on for too long and it dries it may go sticky and tacky, you don’t want the Tung Oil to start drying on the surface you want all the excess removed.

Tung oil (500ml)

Tung oil is unpolymerized and is all natural drying oil, providing a tough, flexible and highly water-resistant coating. Perfect for furniture, counter tops, interior and exterior wood surfaces. This oil provides a soft lustre with a finish that is unrivalled by many other oils.

How to use it

Clean and prep your surface

Prep is your friend! make sure your surface is clean, these natural oil finishes won’t penetrate polyurethane or varnish so you would need to remove that by sanding. 

Cut the Oil with Mineral Spirits

Thinning the oil with odorless solvent helps it penetrate the surface and speeds up the dry time. Subsequent coats can be full strength but must be wiped down after 15 minutes. Always allow ample drying time (48 hours+).  Using it without the solvent the dry time is longer. If a solvent has been used cut the Tung Oil it is no longer a food-safe finish.

Applying the oil

After the surface has been prepped by removing any debris, or unwanted previous poly coating, you may proceed to apply the Tung Oil finish. Apply the Tung Oil generously with a brush or cloth. Let the wood soak in the Tung Oil for approximately 5-10 minutes. Remove the excess Tung Oil within 10 minutes of application, if you leave the Tung Oil on for too long and it dries it may go sticky and tacky, you don’t want the Tung Oil to start drying on the surface you want all the excess removed.

Virtually clear on application this subtle metallic offers a soft shimmer overall.

- Waxes are excellent over Fusion Mineral Paint or MMSMP for added sheen or specialty effects.

- All waxes take about 30 days to cure.

⇒back to previous page