Home ON-LINE SHOP FUSION MINERAL PAINT Finishes Tough Coat Wipe-on Poly GLOSS - 500ml
Tough Coat Wipe-on Poly GLOSS - 500ml
Product no.: PMF - 067[1]This product is subject to possible delivery delays.
Tough Coat Wipe-On Poly
Fusion™ Mineral Paint is famous for its built in top coat. The 100% acrylic resin acts as the “glue”, so to speak, and results in the best adhesion, and long-term durability against wear and tear. It is a waterproof, non-porous surface which is why you don’t need a top coat.
Sometimes though, you may want a slight sheen and added colour vibrancy, or you may want the peace of mind of an extra bit of protection over high traffic areas such as kitchen cabinets or table tops. This is where Tough Coat™ Wipe-On Poly comes into play.
Tough Coat™ Wipe-On Poly uses only 100% acrylic resin and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and dries to a matte finish. Fusion™ Tough Coat™ differs from our competition with its use of pure non yellowing acrylic.
Tough Coat Wipe-On Poly Gloss
Looking to create a piece with a high gloss finish that shines? Look no further, you can now achieve this look using our brand NEW Glossy Tough Coat Wipe-On Poly from Fusion™. Our fans asked for a glossy topcoat so we have delivered! Applies the same as the original Matte Tough Coat Wipe-On Poly. Follow this simple tutorial to give any Fusion™ piece that extra shine and protection all in one!
Application
The keys to applying Tough Coat™ to your projects are:
- Use sparingly and work quickly as it dries fast!
- When applying, do not pass over the same area more than 2-3 times.
- We recommend using a fine microfiber applicator like our applicator pads for a smooth consistent finish.
- If applying to a recently painted surface, allow the surface to dry for 12 hours before applying.
- For maximum durability, apply two coats waiting 2-4 hours between applications. In humid areas, longer drying times may be required.
Tip: Do not use over darker colors like Midnight Blue, Ash, Coal Black etc as it may create a veil and imperfections may be more noticeable.
Be sure to gently mix your Tough Coat™ by gently rolling it around prior to using it as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied. If bubbles begin to occur on your piece, simply remove excess Tough Coat™ from your brush and gently brush out the bubbles. Tough Coat™ will begin to dry as you’re using it. In order to avoid brush strokes, try not to spend too much time on one spot and do not back brush (usually no longer than 30 seconds).
Customers who bought this product also bought
Delivery weight: 6 kg
|
Delivery weight: 1 kg
|
Delivery weight: 1 kg
|
Delivery weight: 700 g
|
Delivery weight: 1 kg
|
Browse these categories as well: Fusion Mineral Paint - Finishes, Tools and finishes, Tough Coat, The finishes!