Staining and Finishing Oil - Ebony
237ml

Stain and Finishing Oil is a wood conditioner, stain and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.

It can be used on bare wood or over previously painted surfaces.  No additional top coat required - it is highly durable as is.  If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your color.
 

Applications:

- If you apply it over Fusion Mineral Paint for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.  Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability, or brush on one of the pigmented colors and wipe off immediately for a beautiful, easy glaze effect.

- Our special blend is highly concentrated in pigment, so a little goes a long way.  The 237ml container will cover the same area as 1 liter of comparable stains.

- Please keep in mind that all oil based products typically yellow in time.  Using this over top of a white paint, will cause a slight yellowing effect.  We recommend our Tough Coat for going over lighter colors to avoid yellowing.
 

TIPS:

This Oil is so easy to use!
Click here to find out more!

How to Use on Bare Wood

1. Prep your surface by removing any existing coating on it so that bare wood is revealed
2. Apply SFO by pouring or brushing on a thin layer
3. Wait 15-20 minutes and then wipe away excess using a lint-free rag
4. Optional: add a second coat after 9 hours for a deeper colour or more sheen

How to Use over Fusion Mineral Paint

1. Apply SFO by pouring or brushing on a thin layer
2. Immediately wipe away excess using a lint-free rag
3. Optional: add a second coat after 9 hours for a deeper colour or more sheen
4.  

Staining and Finishing Oil - Cappuccino
237ml

Stain and Finishing Oil is a wood conditioner, stain and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.

It can be used on bare wood or over previously painted surfaces.  No additional top coat required - it is highly durable as is.  If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your color.
 

Applications:

- If you apply it over Fusion Mineral Paint for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.  Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability, or brush on one of the pigmented colors and wipe off immediately for a beautiful, easy glaze effect.

- Our special blend is highly concentrated in pigment, so a little goes a long way.  The 237ml container will cover the same area as 1 liter of comparable stains.

- Please keep in mind that all oil based products typically yellow in time.  Using this over top of a white paint, will cause a slight yellowing effect.  We recommend our Tough Coat for going over lighter colors to avoid yellowing.
 

TIPS:

This Oil is so easy to use!
Click here to find out more!

How to Use on Bare Wood

1. Prep your surface by removing any existing coating on it so that bare wood is revealed
2. Apply SFO by pouring or brushing on a thin layer
3. Wait 15-20 minutes and then wipe away excess using a lint-free rag
4. Optional: add a second coat after 9 hours for a deeper colour or more sheen

How to Use over Fusion Mineral Paint

1. Apply SFO by pouring or brushing on a thin layer
2. Immediately wipe away excess using a lint-free rag
3. Optional: add a second coat after 9 hours for a deeper colour or more sheen

=>back

Stain and Finishing Oil - Driftwood
237ml

Stain and Finishing Oil is a wood conditioner, stain and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.

It can be used on bare wood or over previously painted surfaces.  No additional top coat required - it is highly durable as is.  If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your color.
 

Applications:

- If you apply it over Fusion Mineral Paint for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.  Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability, or brush on one of the pigmented colors and wipe off immediately for a beautiful, easy glaze effect.

- Our special blend is highly concentrated in pigment, so a little goes a long way.  The 237ml container will cover the same area as 1 liter of comparable stains.

- Please keep in mind that all oil based products typically yellow in time.  Using this over top of a white paint, will cause a slight yellowing effect.  We recommend our Tough Coat for going over lighter colors to avoid yellowing.
 

TIPS:

This Oil is so easy to use!
Click here to find out more!

How to Use on Bare Wood

1. Prep your surface by removing any existing coating on it so that bare wood is revealed
2. Apply SFO by pouring or brushing on a thin layer
3. Wait 15-20 minutes and then wipe away excess using a lint-free rag
4. Optional: add a second coat after 9 hours for a deeper colour or more sheen

How to Use over Fusion Mineral Paint

1. Apply SFO by pouring or brushing on a thin layer
2. Immediately wipe away excess using a lint-free rag
3. Optional: add a second coat after 9 hours for a deeper colour or more sheen

=>back

Staining and Finishing Oil - White
237ml

Stain and Finishing Oil is a wood conditioner, stain and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.

It can be used on bare wood or over previously painted surfaces.  No additional top coat required - it is highly durable as is.  If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your color.
 

Applications:

- If you apply it over Fusion Mineral Paint for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.  Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability, or brush on one of the pigmented colors and wipe off immediately for a beautiful, easy glaze effect.

- Our special blend is highly concentrated in pigment, so a little goes a long way.  The 237ml container will cover the same area as 1 liter of comparable stains.

- Please keep in mind that all oil based products typically yellow in time.  Using this over top of a white paint, will cause a slight yellowing effect.  We recommend our Tough Coat for going over lighter colors to avoid yellowing.
 

TIPS:

This Oil is so easy to use!
Click here to find out more!

How to Use on Bare Wood

1. Prep your surface by removing any existing coating on it so that bare wood is revealed
2. Apply SFO by pouring or brushing on a thin layer
3. Wait 15-20 minutes and then wipe away excess using a lint-free rag
4. Optional: add a second coat after 9 hours for a deeper colour or more sheen

How to Use over Fusion Mineral Paint

1. Apply SFO by pouring or brushing on a thin layer
2. Immediately wipe away excess using a lint-free rag
3. Optional: add a second coat after 9 hours for a deeper colour or more sheen

=>back

Virtually clear on application this subtle metallic offers a soft shimmer overall.

- Waxes are excellent over Fusion Mineral Paint or MMSMP for added sheen or specialty effects.

- All waxes take about 30 days to cure.

⇒back to previous page
 

This on trend rose gold offers the perfect shade of pink and a little shimmer for a subtle and sophisticated accent.

- Waxes are excellent over Fusion Mineral Paint or MMSMP for added sheen or specialty effects.

- All waxes take about 30 days to cure.

⇒back to previous page
 

Copper will look fabulous over darker colours to make them really shine - imagine old world age and copper patina.

- Waxes are excellent over Fusion Mineral Paint or MMSMP for added sheen or specialty effects.

- All waxes take about 30 days to cure.

⇒back to previous page
 

A fine museum quality wax, based on an old family recipe, this wax goes on like butter. Soft and smooth, it's easy to apply and provides a durable finish with a beautiful luster and has almost no odor. 

How to use this product

• Use a clean cotton cloth or brush to apply wax in a thin layer. 
• Allow it to dry for 3-5 minutes. 
• Buff to a shine with a clean lint-free cotton cloth. 
• For additional shine and durability, apply a second coat. 
• Clean brush with soap and warm water.

- All waxes take about 30 days to cure.

⇒back to previous page

Fusion Mineral Paint's furniture wax is exceptionnaly durable, consisting of pure natural beeswax, a touch of carnuba wax and an odorless mineral solvent for workability.

- Waxes are excellent over Fusion Mineral Paint or MMSMP for added sheen or specialty effects.

- All waxes take about 30 days to cure.

⇒back to previous page
 

Liming is excellent for getting an old french pickled effect. 

- Waxes are excellent over Fusion Mineral Paint or MMSMP for added sheen or specialty effects.

- All waxes take about 30 days to cure.

⇒back to previous page