Milk Paint by Fusion - How to Guide

photos: Milk Paint by Fusion

How to mix milk paint (scroll down to see video)

- Mix 1 part water to 1 part milk paint powder.

- Paint may be mixed in a blender, or using a milk frother, or in a container with a whisk or brush.
  

- Add water in first and then add the powder incrementally.  You may also do the reverse and simply add water onto the powder.

- Mix for 1-3 minutes until water is absorbed into the powder and the mixture is relatively smooth.

- Water to powder ratio may be adjusted to achieve desired consistency. 

- Test your consistency on a spare piece of wood. Your mixture should provide good one coat coverage.  




   

- If your mixture is too thin it will be more transparent and stain like. Add more powder to thicken and stir again.

- Excess can be stored in an airtight container in the refrigerator for 5-7 days.

- Stir frequently while using as the pigments will settle to the bottom of the container.

- Typically 1-2 coats is requried.

- Allow 30 minutes between coats.

- Finish with Furniture Wax or Hemp Oil Wood Finish.





→ Some safety guidelines when manipulating milk paint in powder form and when sanding!

• Avoid inhalation, as well as contact with eyes and skin. Wear rubber gloves and certified mask for dust.

• Keep out of reach of children..

• In case of contact with eyes, flush with cool water, remove contact lenses, if applicable, and continue flushing. Obtain medical attention if irritation persists.

• In case of contact with skin, flush with cool water and wash with soap and water. Obtain medical attention if irritation persists.

• In case of ingestion, do not induce vomiting. Obtain medical attention. Never give anything by mouth if victim is unconscious or is convulsing.
     

Happy Painting!

 

*Disclaimer: Color swatches shown in photos may vary by monitor and may not match actual color.

► BACK TO MILK PAINT BY FUSION PAGE