Tough Coat Wipe-on Poly MATTE- 500ml

Application

The keys to applying Tough Coat™ to your projects are:
-  Use sparingly and work quickly as it dries fast!
-  When applying, do not pass over the same area more than 2-3 times.
-  We recommend using a fine microfiber applicator like our applicator pads for a smooth consistent finish.
-  If applying to a recently painted surface, allow the surface to dry for 12 hours before applying.
-  For maximum durability, apply two coats waiting 2-4 hours between applications. In humid areas, longer drying times may be required.

Tip: Do not use over darker colors like Midnight Blue, Ash, Coal Black etc as it may create a veil and imperfections may be more noticeable.

Be sure to gently mix your Tough Coat™ by gently rolling it around prior to using it as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied. If bubbles begin to occur on your piece, simply remove excess Tough Coat™ from your brush and gently brush out the bubbles. Tough Coat™ will begin to dry as you’re using it. In order to avoid brush strokes, try not to spend too much time on one spot and do not back brush (usually no longer than 30 seconds).